View ATTINY817_8945877.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

avr 8-bit microcontrollers ATTINY817 qtouch moisture demo user guide user guide description the atmel ? ATTINY817 qtouch ? moisture demo kit demonstrates the high performance capacitive touch support of the peripheral touch controller (ptc) while achieving best-in-class conducted immunity and moisture tolerance. it has driven shield for better noise immunity and moisture tolerance. it implements a robust solution that allows customers to easily incorporate the atmel qtouch technology into designs that require a high level of moisture tolerance. features ? four self capacitance buttons ? six leds to display touch and power status ? on-board embedded debugger module for programming/debugging atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016
table of contents description.......................................................................................................................1 features.......................................................................................................................... 1 1. overview....................................................................................................................3 2. hardware description................................................................................................ 4 3. pin configuration....................................................................................................... 5 3.1. self capacitance.......................................................................................................................... 5 3.2. indication...................................................................................................................................... 5 4. unit assembly............................................................................................................6 5. embedded debugger (edbg)................................................................................... 7 6. powering up the kit................................................................................................... 9 6.1. jumper settings............................................................................................................................9 7. board operation.......................................................................................................11 8. schematic................................................................................................................ 12 9. pcb design............................................................................................................. 14 10. bill of materials........................................................................................................ 15 11. reference................................................................................................................ 17 12. revision history.......................................................................................................18 atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 2
1. overview this document describes the ATTINY817 qtouch moisture demo kit. the kit demonstrates self capacitance sensors running on atmel ATTINY817 microcontroller. the associated package for the ATTINY817 qtouch moisture demo kit contains schematics, gerber, bom, and firmware. the kit consists of a base board and a front panel. the front panel is glued to the baseboard. the kit is designed to be used as a standalone unit to evaluate the noise immunity and moisture tolerance performance. figure 1-1.?demo kit atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 3
2. hardware description figure 2-1.?block diagram atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 4
3. pin configuration 3.1. self capacitance the demo kit has four touch buttons, which are based on self-capacitance technology. there are four y- lines used. the front panel is pasted directly onto the pcb. table 3-1.?pin configuration of the self capacitance sensors functionality mcu pin mcu pin name y0 5 pa4 y1 6 pa5 y2 7 pa6 y3 8 pa7 3.2. indication this demo kit has six leds to indicate the status, out of which four leds are for touch detection, one for power status, and one is user led. table 3-2.?pin configuration of leds functionality mcu pin mcu pin name power on led 11 pb5 user led 13 pb3 qtouch led1 9 pb7 qtouch led2 10 pb6 qtouch led3 2 pa3 qtouch led4 21 pc4 atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 5
4. unit assembly there are two separate units for the demo kit: ? acrylic front panel ? base pcb figure 4-1.?board stack up atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 6
5. embedded debugger (edbg) the demo kit features an on-board embedded debugger (edbg) module. this can be used for programming and debugging the firmware using atmel studio. figure 5-1.?edbg module edbg is mounted on the kit as a separate module. by using the edbg the user can program the qtouch moisture demo kit. the edbg has been pre-configured to support an ATTINY817 device using updi interface for programming and debugging. atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 7
figure 5-2.?connecting with edbg for programming using atmel studio atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 8
6. powering up the kit the kit should be powered using usb connected to the edbg module only. there are multiple components in the kit which can handle different voltage ratings. safe operating voltage of ATTINY817 mcu is between 1.8v and 5v. power supplied to the ATTINY817 mcu can be changed by changing the jumper settings. 6.1. jumper settings we have four different jumper settings for powering the ATTINY817 mcu. 1. 5v figure 6-1.?jumper setting for 5v 2. 3.3v figure 6-2.?jumper setting for 3.3v atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 9
3. 2.7v figure 6-3.?jumper settings for 2.7v 4. 1.8v figure 6-4.?jumper settings for 1.8v however, the leds are driven at +3.3v by default to ensure optimum brightness. +3.3v for leds and other components are supplied from the regulator on the edbg module. atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 10
7. board operation figure 7-1.?layout of sensors on the kit there are four individual touch button sensors named 1, 2, 3, and 4. when touching each touch button, their corresponding leds start glowing. also the power led will remain glowing to indicate the on state of the touch panel. atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 11
8. schematic figure 8-1.?mcu and sensor configuration section figure 8-2.?edbg level translators atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 12
figure 8-3.?edbg headers and connectors atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 13
9. pcb design figure 9-1.?top layer figure 9-2.?bottom layer atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 14
10. bill of materials table 10-1.?top level bill of materials component quantity acrylic front panel 1 tiny817 qtouch moisture demo base board-pcba 1 atmel edbg-pcba 1 (rubber feet) bump-on 4 table 10-2.?bill of material for the base board designator quantity value description c102 1 4.7f smd capacitor 0603 c105 1 10f smd tantalum capacitor, esr = 1.7, 3216-18 (eia) 1206, c200, c300, c301, c302, c303, c304, c305, c306, c307, c308, c309, c310, c311, c312, c313 15 100nf smd capacitor 0402 c201, c208 2 4.7nf smd capacitor 0402 c202, c203, c204, c205, c206, c207 6 10nf smd capacitor 0603 d200, d201, d202, d203, d204, d205 6 ltw-c230ds reverse mount smd white led 180-450mcd@20ma j100, j101 2 2x15 pin header, 1.27mm pitch, straight, smd 2x15 pin header, 1.27mm pitch, straight, smd j102 1 1x3 pin header, right angle, 2.54mm pitch smd 1x3 pin header, right angle, 2.54mm pitch smd j103 1 tsm-103-01-t-dh-tr 2x3 pin header, right angle, 2.54mm pitch smd, tin j104 1 horizontal header 1x2 1x2 horizontal pin header, 2.54mm pitch, smd j200 1 20021121-00010c4lf 2x5 pin header, 1.27mm pitch, smd js100, js101, js102 3 snt-100-bk-g jumper cap for 2.54mm pin-header atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 15
designator quantity value description q201, q202, q203, q204, q205, q206 6 bc847w npn smd small signal bjt transistor q300, q301 2 fdc6327c dual n/p-ch mosfet, 20v, 2.7a/-1.9a cont, 8a/-8a pulse, rds(on)<0.08/0.17@vgs=4.5v, vgs(th)<1.5/-1.5v, ssot6 r100, r101 2 47k thick film resistor, smd 0402, 1/16w, 1% r102, r103, r104, r105, r106, r107, r206, r210, r226, r227, r228, r229, r230 13 0 resistor 0.0, 1/16w, 0402 smd r108 1 15k smd resistor 0402 r109 1 39k smd resistor 0402 r113 1 33k smd resistor 0402 r205, r208, r209, r212 4 10k smd resistor 0402 r211, r232, r300, r301, r302, r303, r304, r305, r307 9 100k smd resistor 0402 r213, r306 2 39 smd resistor 0402 r214, r215, r216, r217, r218, r219 6 330 smd resistor 0402 r220, r221, r222, r223, r224, r225 6 10k smd resistor 0603 r231 1 1k smd resistor 0402 sw200 1 skraake010 6.2x6.2mm smd tact switch u101 1 spx3819r2-l/tr 500ma ldo, adj, low noise, 8-dfn package u200 1 ATTINY817-mfr atmel 8-bit risc mcu, engineering sample u300, u301, u302, u303, u304, u305, u306 7 sn74lvc1t45dckr single-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 16
11. reference [1]. qtan0079: buttons, sliders, and wheels, touch sensor design guide - http://www.atmel.com/ images/doc10752.pdf . [2]. at09363: ptc robustness design guide, application note - http://www.atmel.com/images/ atmel-42360-ptc-robustness-design-guide_applicationnote_at09363.pdf . [3]. qtouch modular library peripheral touch controller, user guide - http://www.atmel.com/images/ atmel-42805-qtouch-modular-library-peripheral-touch-controller_user-guide.pdf atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 17
12. revision history doc rev. date comments 42798a 11/2016 initial document release atmel ATTINY817 qtouch moisture demo user guide [user guide] atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 18
atmel corporation 1600 technology drive, san jose, ca 95110 usa t: (+1)(408) 441.0311 f: (+1)(408) 436.4200 | www.atmel.com ? 2016 atmel corporation. / rev.: atmel-42798a-ATTINY817-qtouch-moisture-demo-user-guide_user guide-11/2016 atmel ? , atmel logo and combinations thereof, enabling unlimited possibilities ? , avr ? , qtouch ? , and others are registered trademarks or trademarks of atmel corporation in u.s. and other countries. other terms and product names may be trademarks of others. disclaimer: the information in this document is provided in connection with atmel products. no license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of atmel products. except as set forth in the atmel terms and conditions of sales located on the atmel website, atmel assumes no liability whatsoever and disclaims any express, implied or statutory warranty relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or non-infringement. in no event shall atmel be liable for any direct, indirect, consequential, punitive, special or incidental damages (including, without limitation, damages for loss and profits, business interruption, or loss of information) arising out of the use or inability to use this document, even if atmel has been advised of the possibility of such damages. atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. atmel does not make any commitment to update the information contained herein. unless specifically provided otherwise, atmel products are not suitable for, and shall not be used in, automotive applications. atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. safety-critical, military, and automotive applications disclaimer: atmel products are not designed for and will not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death (safety-critical applications) without an atmel officer's specific written consent. safety-critical applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems. atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by atmel as military-grade. atmel products are not designed nor intended for use in automotive applications unless specifically designated by atmel as automotive-grade.

▲Up To Search▲

Price & Availability of ATTINY817

	To Download ATTINY817 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .